PD5030 - DC Block Power Splitter Combiner
3 Way, Type N Jack, 698 - 2700 MHz, 50 Ohm Coax
Features & Benefits
PD5030 is a 3 way, passive, 50 ohm, DC blocking RF power divider, power combiner with N type connectors passing DC one port and blocking DC two ports. The pass port passes RF, 10 MHz and DC. The blocked ports pass 10 MHz and RF but block DC current. Maximum voltage rating at the DC blocked ports is 50 VDC. All wireless band applications in the 698 to 2700 MHz and L Band frequency range covered with best in class performance. The RoHS compliant, bidirectional PD5030 is capable of handling input power levels up to 40 watts in both power splitter and power combiner applications. See 3 way power divider input rating tables for info.
The heart of the unit is a precision designed and etched Wilkinson type microstrip circuit on a low loss, high frequency, dielectric substrate. Electrical performance is highlighted by 0.6 dB max insertion loss (above the -4.77 dB power split), 18 dB min isolation, 1.35:1 max input VSWR and 1.25:1 max output port VSWR. Equal power split and symmetry is displayed by 0.2 dB amplitude balance and 3 degrees phase balance. Narrow band RF performance over your frequency range may be even better. See 3 way power divider test sweeps for details.
Mechanical features include precision CNC, brass, 50 ohm N type female coaxial connectors with tri alloy plating to insure tarnish resistance and low PIM operation. Connector pins are gold-plated phosphor bronze for reliability and low contact resistance. Virgin electrical grade PTFE support insulators captivate the contact pins enabling trouble free coaxial
Housing dimensions are 2.98" wide by 2.98" deep by 0.88" high (75.7 x 75.7 x 22.2 mm). The N-type female (jack) connectors extend 0.65" (16.5 mm) from the housing. Operating temperature range is from -65°C to +85°C. Weight is 346 grams. See 3 way power divider outline drawing for more information.
The PD5030 3-way, type N jack, DC blocking power splitter combiner is ideal for a wide range of wireless radio frequency microwave applications on both transmit and receive sides, ranging from amplifier sharing & receiver combining to antenna splitting, and is deployed world wide in networks encompassing 700 MHz Public Safety Band, 800 MHz cellular, GSM 850, 900, 1800 & 1900, PCS 1900, 1 GHz to 2 GHz L-Band, GPS, W-CDMA-3G, UMTS, TETRA, RFID, IEEE802.11b/g, 2.45 GHz ISM, Wi Fi and 2.3 GHz & 2.5 GHz WiMAX.
Options / Additional Models
Outdoor Model: An IP67 rated outdoor version of this DC blocking 3 way power combiner divider is available with RoHS construction and silicone o-rings sealing all components for exterior use. PD5031
DC Block Three Ports: Often used for combining applications to prevent passing DC to sum or adjacent ports. PD5032
Standard RoHS Model: A standard RoHS compliant version of this three way power combiner divider is available passing DC current through all ports. PD2030
GPS Splitter: 3 way GPS antenna signal splitter covering L1, L2, GLONASS and Galileo GNSS global navigation satellite system positioning frequency bands.
GPS300: Three way GPS signal splitter, DC pass one port - providing a means to power an active GPS antenna - other ports DC blocked and furnished with 200 ohm internal loads to simulate antenna preamp current draw preventing the GPS receiver from sensing an antenna fault.