PD5060 - DC Blocking Power Splitter Combiner
6 Way, N Type Female, 698 - 2700 MHz, 50 Ohm
Features & Benefits
PD5060 is a 6 way, passive, 50 ohm, DC blocking RF power divider, power combiner with N type connectors passing DC one port and blocking DC five ports. The pass port passes RF, 10 MHz and DC. The blocked ports pass 10 MHz and RF but block DC current. Maximum voltage rating at the DC blocked ports is 50 VDC. All wireless band applications in the 698 to 2700 MHz and L Band frequency range covered with best in class performance. The RoHS compliant, bidirectional PD5060 is capable of handling input power levels up to 40 watts in both power splitter and power combiner applications. See 6 way power divider input rating tables for info.
The heart of the unit is a precision designed and etched Wilkinson type microstrip circuit on a low loss, high frequency, dielectric substrate. The Wilkinson microstrip circuit passes DC current to all ports making it ideal for use in active systems. Power splitter dividers passing DC to select ports and blocking DC to others are also available. See options (right). A true 6 way power divider, power combiner with equal power split and balance, the PD5060's electrical performance is highlighted by 1.1 dB max insertion loss (above the -7.78 dB power split), 18 dB min isolation, 1.40:1 max input VSWR and 1.25:1 max output VSWR. Equal power split and balance is displayed by 0.3 dB max amplitude balance and 5 degrees max phase balance. Narrow band RF performance over your frequency range may be even better. See 6 way Type N Female power divider test sweeps for specific details.
Mechanical features include precision CNC, brass, 50 ohm N type female coaxial connectors with tri alloy plating to insure tarnish resistance and low PIM operation. Connector pins are gold plated phosphor bronze for reliability and low contact resistance.
Housing dimensions are 5.98" wide by 2.98" deep by 0.88" high (151.9 x 75.7 x 22.2 mm). The N-type female connectors extend 0.65" (16.5 mm) from the housing. Operating temperature range is from -65°C to +85°C. Weight is 664 grams. See 6 way RF power splitter outline drawing for more information.
The PD5060 6-way, N female (jack), DC Blocking power divider (splitter) combiner is ideal for a wide range of wireless radio frequency microwave applications on both transmit and receive sides, ranging from amplifier sharing & receiver combining to antenna splitting, and is deployed world wide in networks encompassing 700 MHz Public Safety Band, 800 MHz cellular, GSM 850, 900, 1800 & 1900, PCS 1900, 1 GHz to 2 GHz L-Band, GPS, W-CDMA-3G, UMTS, TETRA, RFID, IEEE802.11b/g, 2.45 GHz ISM, Wi Fi and 2.3 GHz & 2.5 GHz WiMAX.
Options / Additional Models
Standard Model: A RoHS compliant version of this six way power combiner divider is available utilizing tin/lead solder and comprising a yellow iridite finish. PD1060
RoHS Model: A standard version of this six way power combiner divider is available with no-lead solder and a finish free of hexavalent chromium. PD2060
DC Blocking All Ports: DC block 6 ports. Typically used in combining applications to prevent passing DC to sum port or other inputs. PD5062
GPS Splitter: 6-way GPS antenna signal splitter covering L1, L2, GLONASS and Galileo GNSS global navigation satellite system positioning frequency bands.
GPS600: Six way GPS signal splitter, DC pass one port - providing a means to power an active GPS antenna - other ports DC blocked and furnished with 200 ohm internal loads to simulate antenna preamp current draw, preventing the GPS receiver from sensing antenna fault.