| 2 Way Power Divider RF Input Ratings | ||
|---|---|---|
| Into Matched Load VSWR's |
In-Phase | 180° Out-of-Phase |
| 1.2 : 1 | 20 Watts | 20 Watts |
| 2.0 : 1 | 20 Watts | 5 Watts |
| ∞ | 10 Watts | 0.5 Watts |
| 2 Way Power Combiner RF Input Ratings | ||
| Input Signals | In-Phase | 180° Out-of-Phase |
| Coherent | 2 X 10 Watts | 2 X 0.25 Watts |
| Non-Coherent | 2 X 0.5 Watts | |
Typically used for powering an active antenna thru pass
ports while splitting the GPS signal between 2 receivers
| Circuit Design ……… |
Passive Wilkinson Microstrip; DC pass, DC block 1 port ea |
| Connectors …………… | N Type Jack, 50 Ohm Coaxial |
| Body …………………… | Brass, Tri-Alloy Plate |
| Connector Pin … | Phosphor Bronze, Gold Plate |
| Insulator …………… | PTFE, Virgin Electrical Grade |
| Housing ………………… | Aluminum, Clear Chem Film |
| Operating Temp … | -65°C to +85°C |
| Weight …………………… | 174 Grams |