Power Splitter / Power Combiner
GPS410 - GPS Antenna Signal Splitter
4 Way, SMA Jack, 1000 - 2000 MHz, 50 Ohm
GPS, GLONASS, Galileo splitter, 4 way, SMA
DC pass 1 port, DC block 3 ports with 200 Ω load
- GPS L1 - L5, GLONASS, Galileo Splitter
- Low Insertion Loss (0.4 dB avg)
- High Port to Port Isolation (30 dB avg)
- Excellent VSWR (1.10 : 1 avg)
- 10 VDC & 50 mA max on DC block ports
- RoHS Compliant Splitter Construction
| 4 Way GPS Signal Splitter Input Ratings | ||
|---|---|---|
| Into Matched Load VSWR's |
In-Phase | 180° Out-of-Phase |
| 1.2 : 1 | 20 Watts | 20 Watts |
| 2.0 : 1 | 20 Watts | 10 Watts |
 |
10 Watts | 1 Watts |
| 4 Way GPS Signal Combiner Input Ratings | ||
| Input Signals | In-Phase | 180° Out-of-Phase |
| Coherent | 4 X 5 Watts | 4 X 0.25 Watts |
| Non-Coherent | 4 X 0.5 Watts | |
Typically used for powering active GPS antenna thru pass
ports while splitting the GPS signal between 4 receivers
| Circuit Design ……… |
Passive Wilkinson Splitter DC Pass 1 port, DC Block 3 ports |
| Connectors …………… | SMA Jack, 50 Ohm Coaxial |
| Body …………………… | Brass, Tri-Alloy Plate |
| Connector Pin … | Beryllium Copper, Gold Plate |
| Insulator …………… | PTFE, Virgin Electrical Grade |
| Housing ………………… | Aluminum, Clear Chem Film |
| Operating Temp … | -65°C to +85°C |
| Weight …………………… | 383 Grams |
