PD2960 - RF Power Splitter, Combiner, Divider
RoHS, 6 Way, TNC Female, 698 - 2700 MHz, 50 Ohm
Features & Benefits
PD2960 is a RoHS compliant, 6 way, wideband, 50 ohm, RF power divider, power combiner furnished with TNC female coaxial connectors. All wireless band frequencies in the range from 698 to 2700 MHz are covered with optimal RF performance. Max microwave input power levels up to 40 watts can be handled in both power splitter and power combiner applications. See 6 way power divider input rating tables for additional details.
The heart of the unit is a precision designed and etched Wilkinson type microstrip circuit on a low loss, high frequency, dielectric substrate. The Wilkinson microstrip circuit passes DC current to all ports making it ideal for use in active systems. Power splitter dividers passing DC to select ports and blocking DC to others are also available. See options (right). Electrical performance is highlighted by 1.1 dB max insertion loss (above the -7.78 dB power split), 18 dB min isolation, 1.40:1 max input VSWR and 1.20:1 max output VSWR. Equal power split and balance is displayed by 0.3 dB max amplitude balance and 5 degrees max phase balance. Narrow band RF performance over your frequency range may be even better. See 6 way power divider test sweeps for specific details.
Housing dimensions are 5.98" wide by 2.98" deep by 0.88" high (151.9 x 75.7 x 22.2 mm). The TNC female (jack) connectors extend 0.61" (15.5 mm) from the housing. Operating temperature range is from -65°C to +85°C. Weight is 573 grams. See 6 way power divider outline drawing for more information.
The PD2960 6-way, TNC Female (jack), power divider (splitter) combiner is ideal for a wide range of wireless radio frequency microwave applications on both transmit and receive sides, ranging from amplifier sharing & receiver combining to antenna splitting, and is deployed world wide in networks encompassing 700 MHz Public Safety Band, 800 MHz cellular, GSM 850, 900, 1800 & 1900, PCS 1900, 1 GHz to 2 GHz L-Band, GPS, W-CDMA-3G, UMTS, TETRA, RFID, IEEE802.11b/g, 2.45 GHz ISM, Wi Fi and 2.3 GHz & 2.5 GHz WiMAX.
Options / Additional Models
PD5060: DC pass 1 port, DC block five ports. Typically used for powering an active antenna through the DC pass port of the RF power divider splitter.
PD5062: DC block 5 ports. Typically used in combining applications to prevent passing DC to sum port or adjacent ports.
Standard RoHS Model: A standard RoHS compliant version of this six way power combiner divider is available passing DC current through all ports. PD2060