PD5162 is a DC blocking, six way, RF broadband, 50 ohm, power divider, power combiner furnished with N type coaxial connectors. The passive Wilkinson design blocks DC current at all ports. All ports pass RF and 10 MHz. Max voltage rating at the DC blocked ports is 50 VDC. All wireless band applications in the frequency range from 698 to 2700 MHz are covered with best in class RF performance. The RoHS compliant PD5162 is a bidirectional device capable of 40 W max microwave input power levels in both power splitter and combiner apps. See 6 way power divider input rating tables for additional power handling info.
The heart of the unit is a precision designed and etched Wilkinson type microstrip circuit on a low loss, high frequency, dielectric substrate. Electrical performance is highlighted by 1.1 dB max insertion loss (above the 7.78 dB power split), 18 dB min isolation, 1.40:1 max input VSWR and 1.25:1 max output port VSWR. Equal power split and symmetry is displayed by 0.3 dB amplitude balance and 5 degrees phase balance. Narrow band RF performance over your frequency range may be even better. See 6 way power divider test sweeps for details.
Mechanical features include precision CNC, brass, 50 ohm SMA female coaxial connectors with tri alloy plating to insure tarnish resistance and low PIM operation. Connector pins are gold plated baryllium copper for reliability and low contact resistance. Virgin electrical grade PTFE support insulators captivate the
Housing dimensions are 5.98" wide by 2.98" deep by 0.88" high (151.9 x 75.7 x 22.2 mm). The SMA female (jack) connectors extend 0.44" (11.1 mm) from the housing. Operating temperature range is from -65°C to +85°C. Weight is 568 grams. See 6 way DC block splitter outline drawing for more information.
The PD5162 6-way, SMA jack, DC blocking, power splitter combiner is ideal for a wide range of wireless radio frequency microwave applications on both transmit and receive sides, ranging from amplifier sharing & receiver combining to antenna splitting, and is deployed world wide in networks encompassing 700 MHz Public Safety Band, 800 MHz cellular, GSM 850, 900, 1800 & 1900, PCS 1900, 1 GHz to 2 GHz L-Band, GPS, W-CDMA-3G, UMTS, TETRA, RFID, IEEE802.11b/g, 2.45 GHz ISM, Wi Fi and 2.3 GHz & 2.5 GHz WiMAX.
Standard DC Block: One port passes DC; other ports block DC. Typically used to power a remotely located active antenna or low-noise amplifier. PD5160
Standard RoHS Model: A standard RoHS compliant version of this six way power combiner divider is available passing DC current through all ports. PD2160
GPS Splitter: 6-way GPS antenna signal splitter covering L1, L2, GLONASS and Galileo GNSS global navigation satellite system positioning frequency bands.
GPS610: Six way GPS signal splitter, DC pass one port - providing a means to power an active GPS antenna - other ports DC blocked and furnished with a 200 ohm internal load to simulate antenna preamp current draw thus preventing the GPS receiver from sensing antenna fault.