RF Bias Tees 10-4000 MHz, 1.5A, 100 VDC
Low loss, High RF-DC isolation

A Bias Tee is a 3-port device commonly used to transparently inject DC current into, or extract DC current from, a bidirectional RF transmission line, leaving the RF signal undisturbed. A blocking capacitor restricts DC current to the RF+DC out port only. A common bias tee application is powering a remotely located active antenna or low-noise amplifier through an RF coax line. Similarly, bias tees are used to tap DC off an RF coax line with existing DC feed.
INSTOCK Wireless bias tees operate from 10-4000 MHz handling high 1.5 A current at 50 VDC while providing best-in-class electrical performance demonstrated by low 0.15 dB insertion loss, high 60 dB RF-to-DC isolation, and exceptional 1.10:1 VSWR. Bias tees are offered with N-type, SMA, TNC, & BNC coaxial connector options with DC feed-through pin.
All models are INSTOCK and ready to ship. Mix-and-match connector customization also available. Contact us today with your custom Bias Tee requirement.

Coaxial Bias Tee Specifications

Model No. Coaxial Connectors Frequency Range (MHz) Insertion Loss (max) VSWR (max) DC Voltage (max) DC Current (max) Isolation (min) RF Input Power (max)
BT4120 SMA 10-4000 0.35 dB 1.20:1 100 V 1.5 A 40 dB 100 W
BT4020 N Type 10-4000 0.35 dB 1.20:1 100 V 1.5 A 40 dB 100 W
BT4024 N Type 10-4000 0.30 dB 1.20:1 100 V 1.5 A 40 dB 100 W
BT4028 N Type 10-4000 0.30 dB 1.20:1 100 V 1.5 A 40 dB 100 W
BT4025 N Type & BNC 10-4000 0.35 dB 1.20:1 100 V 1.5 A 40 dB 100 W
BT4128 SMA 10-4000 0.30 dB 1.20:1 100 V 1.5 A 40 dB 100 W
BT4920 TNC 10-4000 0.35 dB 1.20:1 100 V 1.5 A 40 dB 100 W
BT4928 TNC 10-4000 0.35 dB 1.20:1 100 V 1.5 A 40 dB 100 W
BT4520 BNC 10-4000 0.35 dB 1.20:1 100 V 1.5 A 40 dB 100 W
BT4528 BNC 10-4000 0.35 dB 1.20:1 100 V 1.5 A 40 dB 100 W
Back to Top