Power Splitter / Power Combiner
Top Selling RF Dividers
Same Day Shipping on all orders received by 6:30 PM Eastern

TNC Female Power Dividers, Combiners, Splitters
N-Way, 0.698-2.700 GHz, 40 Watts

INSTOCK Wireless offers all power divider, power combiner models with TNC female (jack) 50 ohm coaxial connectors with models covering 350-1000 MHz, 698-2700 MHz, 1-2 GHz (GPS/GNSS), and 2.4-6.0 GHz. Weather-resistant models are available featuring IP67 weatherproof construction offering protection against the elements for uninterupted outdoor use. All models are RoHS-compliant.

Jump to TNC Spec Table ↴

2-Way TNC Jack Power Divider, Power Combiner

PD2920 is a broadband RF 2way power divider, power combiner furnished with TNC Female connectors. All wireless frequencies from 0.698 - 2.700 GHz are covered with optimum performance. 40 watts input max microwave power can be handled in both power divider and power combiner scenarios. See input power rating tables…

2-Way TNC Power Divider Outline Drawing
350-1000 MHz Power Combiner Divider, 2 Way, TNC

PD2921 is a 50 ohm 2-way RF power splitter combiner with TNC female coaxial connectors spanning 350-1000 MHz. Wilkinson RF design optimized for UHF, 433 MHz RFID, TETRA, Public Safety Band and 700 MHz, 800 MHz, & 900 MHz LTE wireless applications featuring RoHS-compliant construction.

RoHS Power Combiner Divider, 2 Way, TNC - Dimension Drawing
DC Blocking Power Splitter Combiner, 2 Way, TNC

PD5920 is a 50 ohm 2 way passive TNC-jack DC blocking power splitter combiner with one port passing DC and one port blocking DC. Both ports pass 10 MHz, L-Band and RF signals from 698 - 2700 MHz. RoHS compliant with lead free solder and clear film finish. 50 VDC max on blocked port.

DC Block Splitter Combiner Dimensional Drawing
GPS Antenna Signal Splitter, 2 Way, TNC

GPS220 is a 2way passive GPS antenna splitter with TNC jack connectors. One port passes DC to power a remotely located active antenna. Other port blocks DC and is furnished with an internal 200 ohm load serving as a current drain for the GPS receiver not powering the antenna to prevent faulting.

GPS Signal Splitter Outline Specs
Current Steering GPS and L-Band Splitter Combiner, TNC, 698-2700 MHz

CSS220 is a 2-way, TNC, current steering power divider combiner spanning 698-2700 MHz. A special feature of the unit is the diode protection at both ports which accepts two uni-directional DC inputs steered towards a common port. This prevents DC cross-feeding while allowing simultaneous, bi-directional RF.

TNC, Current Steering Power Divider Outline Drawing
IP67 Outdoor Weatherproof, 2 Way, TNC

PD2923 is a 2-way, IP67 weatherproof power divider combiner with TNC female (jack) connectors. IP67-rated outdoor construction ensures protection from the elements providing uninterupted outdoor use. Wilkinson microstrip design passes DC current on all ports.

IP67 water-resistant outdoor TNC splitter outline specs
3-Way TNC Jack Power Divider, Power Combiner

PD2930 is a broadband RF 3way power divider, power combiner furnished with TNC Female connectors. All wireless frequencies from 0.698 - 2.700 GHz are covered with optimum performance. 40 watts input max microwave power can be handled in both power divider and power combiner scenarios. See input power rating tables…

3-Way TNC Power Divider Outline Drawing
350-1000 MHz Power Combiner Divider, 3 Way, TNC

PD2931 is a 50 ohm 3-way RF power splitter combiner with TNC female coaxial connectors spanning 350-1000 MHz. Wilkinson RF design optimized for UHF, 433 MHz RFID, TETRA, Public Safety Band and 700 MHz, 800 MHz, & 900 MHz LTE wireless applications featuring RoHS-compliant construction.

RoHS Power Combiner Divider, 3 Way, TNC - Dimension Drawing
DC Blocking Power Splitter Combiner, 3 Way, TNC

PD5930 is a 50 ohm 3 way passive TNC-jack DC blocking power splitter combiner with one port passing DC and two ports blocking DC. All ports pass 10 MHz, L-Band and RF signals from 698 - 2700 MHz. RoHS compliant with lead free solder and clear film finish. 50 VDC max on blocked ports.

DC Block Splitter Combiner Dimensional Drawing
GPS Antenna Signal Splitter, 3 Way, TNC

GPS320 is a 3 way passive GPS, GLONASS, Galileo splitter with TNC connectors. 1 port passes DC for powering a remotely located active GPS antenna. Other ports block DC furnished with internal 200 ohm load draining current from GPS receivers not powering the antenna to prevent faulting.

GPS Signal Splitter, 3 Way, TNC Outline Drawing
IP67 Outdoor Weatherproof, 3 Way, TNC

PD2933 is a 3-way, IP67 weatherproof power divider combiner with TNC female (jack) connectors. IP67-rated outdoor construction ensures protection from the elements providing uninterupted outdoor use. Wilkinson microstrip design passes DC current on all ports.

IP67 water-resistant outdoor TNC splitter outline specs
4-Way TNC Jack Power Divider, Power Combiner

4-way, TNC-jack, 698-2700 MHz

PD2940 is a broadband RF 4way power divider, power combiner furnished with TNC Female connectors. All wireless frequencies from 0.698 - 2.700 GHz are covered with optimum performance. 40 watts input max microwave power can be handled in both power divider and power combiner scenarios. See input power rating tables…

4-Way TNC Power Divider Outline Drawing
350-1000 MHz Power Combiner Divider, 4 Way, TNC

PD2941 is a 50 ohm 4-way RF power splitter combiner with TNC female coaxial connectors spanning 350-1000 MHz. Wilkinson RF design optimized for UHF, 433 MHz RFID, TETRA, Public Safety Band and 700 MHz, 800 MHz, & 900 MHz LTE wireless applications featuring RoHS-compliant construction.

RoHS Power Combiner Divider, 4 Way, TNC - Dimension Drawing
DC Blocking Power Splitter Combiner, 4 Way, TNC

PD5940 is a 50 ohm 4 way passive TNC-jack DC blocking power splitter combiner with one port passing DC and three ports blocking DC. All ports pass 10 MHz, L-Band and RF signals from 698 - 2700 MHz. RoHS compliant with lead free solder and clear film finish. 50 VDC max on blocked ports.

DC Block Splitter Combiner Dimensional Drawing
GPS Antenna Signal Splitter, 4 Way, TNC

1x4 TNC splitter for GPS/GNSS

GPS420 is a 4 way passive GPS, GLONASS, Galileo splitter with TNC connectors. 1 port passes DC for powering a remotely located active GPS antenna. Other ports block DC furnished with internal 200 ohm load draining current from GPS receivers not powering the antenna to prevent faulting.

GPS Signal Splitter, 4Way, SMA Dimension Dwg
IP67 Outdoor Weatherproof, 4 Way, TNC

PD2943 is a 4-way, IP67 weatherproof power divider combiner with TNC female (jack) connectors. IP67-rated outdoor construction ensures protection from the elements providing uninterupted outdoor use. Wilkinson microstrip design passes DC current on all ports.

IP67 water-resistant outdoor TNC splitter outline specs
6 Way TNC Power Divider, Power Combiner.

TNC Power Splitter Combiner

PD2960 is a 50 ohm six way RF power splitter combiner with TNC coaxial connectors featuring RoHS construction of lead free solder and clear film finish. Wilkinson RF design with radio frequency coverage from 698 - 2700 MHz including GSM, W-CDMA, L Band, GPS, WiMAX, WiFi and 4G LTE wireless apps.

6 Way TNC Splitter Outline Drawing
350-1000 MHz Power Combiner Divider, 6 Way, TNC

UHF/RFID TNC Splitter Combiner

PD2961 is a 50 ohm 6-way RF power splitter combiner with TNC female coaxial connectors spanning 350-1000 MHz. Wilkinson RF design optimized for UHF, 433 MHz RFID, TETRA, Public Safety Band and 700 MHz, 800 MHz, & 900 MHz LTE wireless applications featuring RoHS-compliant construction.

RoHS Power Combiner Divider, 6 Way, TNC - Dimension Drawing
6 Way, DC Blocking, TNC Power Divider Combiner

TNC splitter DC block

PD5960 is a 6way RF power divider combiner with 50 ohm TNC coaxial connectors DC pass one port, DC block 5 ports. Wilkinson RF design with radio frequency coverage from 698 - 2700 MHz including GSM, W-CDMA, L Band, GPS, WiMAX, WiFi and 4G LTE wireless apps.

6 Way, TNC, DC Blocking Power Divider Combiner Outline Drawing
6 Way TNC GPS Signal Splitter

TNC GPS antenna splitter

GPS620 is a 6way passive GPS antenna splitter with TNC connectors. One port passes DC to power a remotely located active antenna. Other ports block DC and are furnished with an internal 200 ohm load serving as a current drain for the GPS receivers not powering the antenna to prevent faulting.

6 Way TNC GPS Antenna Splitter Outline Drawing
8 Way TNC Power Divider, Power Combiner.

TNC Power Splitter Combiner

PD2980 is a 50 ohm eight way RF power splitter combiner with TNC coaxial connectors featuring RoHS construction of lead free solder and clear film finish. Wilkinson RF design with radio frequency coverage from 698 - 2700 MHz including GSM, W-CDMA, L Band, GPS, WiMAX, WiFi and 4G LTE wireless apps.

8 Way TNC Splitter Outline Drawing
350-1000 MHz Power Combiner Divider, 8 Way, TNC

UHF/RFID TNC Splitter Combiner

PD2981 is a 50 ohm 8-way RF power splitter combiner with TNC female coaxial connectors spanning 350-1000 MHz. Wilkinson RF design optimized for UHF, 433 MHz RFID, TETRA, Public Safety Band and 700 MHz, 800 MHz, & 900 MHz LTE wireless applications featuring RoHS-compliant construction.

RoHS Power Combiner Divider, 8 Way, TNC - Dimension Drawing
8 Way, DC Blocking, TNC Power Divider Combiner

TNC splitter DC block

PD5980 is a 8way RF power divider combiner with 50 ohm TNC coaxial connectors DC pass one port, DC block 7 ports. Wilkinson RF design with radio frequency coverage from 698 - 2700 MHz including GSM, W-CDMA, L Band, GPS, WiMAX, WiFi and 4G LTE wireless apps.

8 Way, TNC, DC Blocking Power Divider Combiner Outline Drawing
GPS Passive Antenna Signal Splitter, 8 Way, TNC

TNC GPS/GNS signal splitter

GPS820 is an 8way passive GPS, GLONASS, Galileo splitter with TNC connectors. 1 port passes DC for powering a remotely located active GPS antenna. Other ports block DC furnished with internal 200 ohm load draining current from GPS receivers not powering antenna to prevent receiver faulting.

GPS Signal Splitter, 8Way, TNC Dimension Dwg
12 Way TNC Power Divider Combiner Splitter

optimum broadband RF performance

PD2912 is an RF wideband 12 way splitter combiner furnished with TNC jack coax connectors. All wireless band frequencies from 0.698 - 2.700 GHz are covered with optimum RF performance. 40 watt input max microwave power can be handled in both power divider and power combiner scenarios. See input power rating tables…

12 Way TNC-Jack Power Divider Outline Drawing
DC Block, TNC-Jack
12 Way TNC Power Divider Combiner Splitter

DC blocking, 50 ohm TNC female

PD5912 is a 12 way L-Band splitter combiner furnished with TNC jack coax connectors. One port passes DC, RF, and 10 MHz signals. Other ports block DC current. 40 watt input max microwave power can be handled in both power divider and power combiner scenarios. See input power rating tables…

12 Way TNC-Jack Power Divider Outline Drawing
16 Way TNC Power Divider Combiner Splitter

optimum broadband RF performance

PD2916 is an RF wideband 16 way splitter combiner furnished with BNC jack coax connectors. All wireless band frequencies from 0.698 - 2.700 GHz are covered with optimum RF performance. 40 watt input max microwave power can be handled in both power divider and power combiner scenarios. See input power rating tables…

16 Way TNC-Jack Power Divider Outline Drawing
DC Block, TNC-Jack
16 Way TNC Power Divider Combiner Splitter

DC blocking, 50 ohm TNC female

PD5916 is a 16 way L-Band splitter combiner furnished with TNC jack coax connectors. One port passes DC, RF, and 10 MHz signals. Other ports block DC current. 40 watt input max microwave power can be handled in both power divider and power combiner scenarios. See input power rating tables…

16 Way TNC-Jack Power Divider Outline Drawing
TNC Female Wilkinson Power Divider Combiner Specifications
Model
No
N
Way
Frequency
Range (MHz)
Insertion Loss
(above split)
Amplitude
Balance
Phase
Balance
Isolation Input
VSWR
Output
VSWR
PD2920 2 Way 698-2700 0.4 dB (3.01 dB) 0.2 dB 22 dB 1.25:1 1.15:1
PD2921 2 Way 350-1000 0.6 dB (3.01 dB) 0.2 dB 22 dB 1.25:1 1.15:1
PD5920 2 Way 698-2700 0.4 dB (3.01 dB) 0.2 dB 22 dB 1.20:1 1.20:1
GPS220 2 Way 1000-2000 0.4 dB (3.01 dB) 0.2 dB 22 dB 1.20:1 1.20:1
CSS220 2 Way 698-2700 0.4 dB (3.01 dB) 0.2 dB 22 dB 1.25:1 1.15:1
PD2923 2 Way 1000-2000 0.4 dB (3.01 dB) 0.2 dB 22 dB 1.20:1 1.15:1
PD2930 3 Way 698-2700 0.6 dB (4.77 dB) 0.2 dB 18 dB 1.30:1 1.25:1
PD2931 3 Way 698-2700 0.7 dB (4.77 dB) 0.3 dB 18 dB 1.35:1 1.20:1
PD5930 3 Way 698-2700 0.6 dB (4.77 dB) 0.2 dB 18 dB 1.35:1 1.25:1
GPS320 3 Way 1000-2000 0.4 dB (4.77 dB) 0.2 dB 20 dB 1.20:1 1.25:1
PD2933 3 Way 698-2700 0.7 dB (4.77 dB) 0.2 dB 18 dB 1.35:1 1.25:1
PD2940 4 Way 698-2700 0.8 dB (6.02 dB) 0.2 dB 22 dB 1.25:1 1.15:1
PD2941 4 Way 350-1000 1.0 dB (6.02 dB) 0.3 dB 22 dB 1.30:1 1.15:1
PD5940 4 Way 698-2700 0.8 dB (6.02 dB) 0.2 dB 22 dB 1.25:1 1.20:1
GPS420 4 Way 1000-2000 0.6 dB (6.02 dB) 0.3 dB 22 dB 1.30:1 1.20:1
PD2943 4 Way 698-2700 0.8 dB (6.02 dB) 0.3 dB 22 dB 1.30:1 1.15:1
PD2960 6 Way 698-2700 1.1 dB (7.78 dB) 0.3 dB 18 dB 1.40:1 1.20:1
PD2961 6 Way 350-1000 0.8 dB (7.78 dB) 0.3 dB 18 dB 1.40:1 1.20:1
PD5960 6 Way 698-2700 1.1 dB (7.78 dB) 0.3 dB 18 dB 1.40:1 1.20:1
GPS620 6 Way 1000-2000 0.7 dB (7.78 dB) 0.4 dB 20 dB 1.35:1 1.25:1
PD2980 8 Way 698-2700 1.3 dB (9.03 dB) 0.5 dB 22 dB 1.35:1 1.15:1
PD2981 8 Way 698-2700 1.3 dB (9.03 dB) 0.5 dB 22 dB 1.35:1 1.15:1
PD5980 8 Way 698-2700 1.3 dB (9.03 dB) 0.5 dB 22 dB 1.35:1 1.15:1
GPS820 8 Way 1000-2000 1.0 dB (9.03 dB) 0.5 dB 22 dB 1.45:1 1.20:1
PD2912 12 Way 698-2700 1.5 dB (10.79 dB) 0.5 dB 18 dB 1.45:1 1.25:1
PD5912 12 Way 698-2700 1.5 dB (10.79 dB) 0.5 dB 18 dB 1.45:1 1.25:1
PD2916 16 Way 698-2700 1.8 dB (12.04 dB) 0.6 dB 10° 20 dB 1.50:1 1.20:1
PD5916 16 Way 698-2700 1.8 dB (12.04 dB) 0.6 dB 10° 20 dB 1.50:1 1.20:1
To view graphical test sweeps, click on Model No. of TNC Female (Jack), RF microwave, Wilkinson power divider, combiner, splitter.
Sales engineers available for your price quotation from 8:00 AM to 8:00 PM Eastern Time