New Power Dividers RF Splitters, Bias Tees
& Power Combiners

DC & 10 MHz Pass/Block L-band Splitter

DC & 10 MHz Pass/Block L-band Splitter, TNC, 698 - 2700 MHz

PD592A is a two way L-Band splitter furnished with TNC coaxial connectors. The passive Wilkinson design passes RF, 10 MHz and DC current through one port, with the other port blocking DC and 10 MHz. PD592A is a bidirectional device capable of 40 W max microwave input power level in both power splitter and combiner apps. See TNC splitter test data for more details.

DC & 10 MHz Block L-band Splitter

Request 3D STEP files for INSTOCK power dividers / combiners.

PD592B is a two way L-Band splitter furnished with TNC coaxial connectors. The passive Wilkinson design blocks DC and 10 MHz at all ports. All wireless band applications in the frequency range from 698 to 2700 MHz are covered with best in class RF performance. PD512B is a bidirectional device capable of 40 W max microwave input power level in both power splitter and combiner apps. See TNC splitter test data for more details.

DC & 10 MHz Pass/Block L-band Splitter

DC & 10 MHz Pass/Block L-band Splitter, BNC, 698 - 2700 MHz

PD552A is a two way L-Band splitter furnished with BNC coaxial connectors. The passive Wilkinson design passes RF, 10 MHz and DC current through one port, with the other port blocking DC and 10 MHz. PD512A is a bidirectional device capable of 40 W max microwave input power level in both power splitter and combiner apps. See BNC splitter test data for more details.

DC & 10 MHz Block L-band Splitter

Request 3D STEP files for INSTOCK power dividers / combiners.

PD552B is a two way L-Band splitter furnished with BNC coaxial connectors. The passive Wilkinson design blocks DC and 10 MHz at all ports. All wireless band applications in the frequency range from 698 to 2700 MHz are covered with best in class RF performance. PD552B is a bidirectional device capable of 40 W max microwave input power level in both power splitter and combiner apps. See BNC splitter test data for more details. test data for more details.

DC & 10 MHz Pass/Block L-band Splitter

DC & 10 MHz Pass/Block L-band Splitter, SMA, 698 - 2700 MHz

PD512A is a two way L-Band splitter furnished with SMA coaxial connectors. The passive Wilkinson design passes RF, 10 MHz and DC current through one port, with the other port blocking DC and 10 MHz. PD512A is a bidirectional device capable of 40 W max microwave input power level in both power splitter and combiner apps. See SMA splitter test data for more details.

DC & 10 MHz Block L-band Splitter

Request 3D STEP files for INSTOCK power dividers / combiners.

PD512B is a two way L-Band splitter furnished with SMA coaxial connectors. The passive Wilkinson design blocks DC and 10 MHz at all ports. All wireless band applications in the frequency range from 698 to 2700 MHz are covered with best in class RF performance. PD512B is a bidirectional device capable of 40 W max microwave input power level in both power splitter and combiner apps. See SMA splitter test data for more details.

DC & 10 MHz Pass/Block L-band Splitter

DC & 10 MHz Pass/Block L-band Splitter, N Type, 698 - 2700 MHz

PD502A is a two way L-Band splitter furnished with N Type coaxial connectors. The passive Wilkinson design blocks DC and 10 MHz at all ports. All wireless band applications in the frequency range from 698 to 2700 MHz are covered with best in class RF performance. PD502A is a bidirectional device capable of 40 W max microwave input power level in both power splitter and combiner apps. See N Type splitter test data for more details.

DC & 10 MHz Block L-band Splitter

Request 3D STEP files for INSTOCK power dividers / combiners.

PD502B is a 2-way, SMA, current steering power divider combiner spanning 698-2700 MHz. A special feature of the unit is the diode protection at both ports which accepts two uni-directional DC inputs steered towards a common port. This prevents DC cross-feeding while allowing simultaneous, bi-directional RF. See current steering SMA splitter test data for more details.

1-2 GHz GPS Splitter, SMA w/ N-Jack Input

1000-2000 MHz, SMA-jack w/ Type N input (sum), GPS antenna signal splitter

GPS230 is a 2-way GPS antenna signal splitter furnished with SMA female connectors on both outputs and a Type N female connector on the input (sum) port. One port passes DC to power a remotely located active antenna. Other port blocks DC and is furnished with an internal 200 ohm load serving as a current drain for the GPS receiver not powering the antenna to prevent faulting. See GPS signal splitter test data for more details.

Current Steering GPS & L-Band Splitter

Request 3D STEP files for INSTOCK power dividers / combiners.

CSS210 is a 2-way, SMA, current steering power divider combiner spanning 698-2700 MHz. A special feature of the unit is the diode protection at both ports which accepts two uni-directional DC inputs steered towards a common port. This prevents DC cross-feeding while allowing simultaneous, bi-directional RF. See current steering SMA splitter test data for more details.

698-2700 MHz, BNC Power Divider

698-2700 MHz, BNC-jack, DC blocking L-band power divider combiner

PD5520 is a DC blocking, 2-way L-band power splitter combiner furnished with BNC female 50 ohm coaxial connectors. One port DC pass, one port DC block. Max voltage at DC blocked port is 50 VDC. All ports pass RF and 10 MHz reference signal. See BNC L-band splitter test data for more details.

SMA Splitter Combiner, 800-6000 MHz

Request 3D STEP files for INSTOCK power dividers / combiners.

PD4720 is an ultra-wideband, 2-way RF power divider combiner furnished with SMA 50 ohm coaxial connectors. Covers all wireless applications from 800 MHz to 6 GHz with optimal performance. T-style configuration provides convenient coaxial cable access to all ports. Max microwave power levels up to 40 watts can be handled in divider and combiner applications. See 0.8-6.0 GHz SMA splitter test data for more details.

800-6000 MHz, N-Type Power Divider

800-6000 MHz Ultra-wideband N-type power divider combiner

PD4620 is an ultra-wideband, 2-way RF power divider combiner furnished with Type N 50 ohm coaxial connectors. Covers all wireless applications from 800 MHz to 6 GHz with optimal performance. T-style configuration provides convenient coaxial cable access to all ports. Max microwave power levels up to 40 watts can be handled in divider and combiner applications. See 0.8-6.0 GHz power divider test data for more details.

SMA Power Divider With N-Type Common Port

Request 3D STEP files for INSTOCK power dividers / combiners.

PD2202 is a 2-way power divider combiner furnished with SMA female 50 ohm connectors at both output ports and a Type N female connector at the common port (input). This is ideal when sharing a large diameter, low-loss antenna cable feed between multiple SMA devices, avoiding the need for cable adapters. Frequency range is 698-2700 MHz. See SMA+N splitter combiner test data for more details.

N-Jack w/ N-Plug Common Port

2 Way power divider combiner, N-jack with N-plug input port

PD2802 is a 2-way RF power divider combiner furnished with Type N 50 ohm coaxial connectors. The output ports use Type N female (jack) connectors, while the input (common/sum) port features a Type N male (plug) connector. Opposite connector genders make the unit directly insertable into your RF transmission line. The larger N-Type male connector also offers a more secure connection over smaller RF coaxial connectors. See Type N jack+plug power divider test data for more details.

QMA Power Divider - Quick Lock, Quick Connect

Request 3D STEP files for INSTOCK power dividers / combiners.

PD2720 is a 2-way power divider combiner furnished with QMA female 50 ohm quick-lock connectors on all ports. QMA quick-connect coaxial connectors save installation time by eliminating the need for tools or torque wrenches and also reduce the chance of a poor connection or permanent connector damage. Frequency range is 698-2700 MHz. See QMA splitter combiner test data for more details.

IP67 Outdoor GPS Signal Splitter, TNC-Jack

Outdoor TNC-jack GPS antenna / signal splitter

GPS221 is 2-way (1x2) passive GPS splitter spanning 1-2 GHz. The DC block and 200 ohm load makes the unit ideal for splitting a GPS antenna signal between two receivers while providing a DC current path to power a remotely located active GPS antenna from one receiver while blocking the DC path from the other. IP67 outdoor weatherproof construction ensures uninterrupted outdoor use. Furnished with TNC female connectors all ports. See GPS outdoor TNC splitter test data for more details.

Bias Tee - High Current, Low Loss, High Isolation

Request 3D STEP files for INSTOCK power dividers / combiners.

BT4020 is a high-isolation bias tee furnished with N-type female 50 ohm coaxial connectors on all ports. Industry-leading electrical performance is highlighted by 1.5 Amp current rating, 0.15 dB average insertion loss, and 65 dB average DC-RF isolation. Frequency range is 10 MHz to 4000 MHz. See N-jack bias tee test data for more details.

Micro "Tiny" GPS Signal Splitter

Micro GPS splitter for UAV / drone applications, SMA

GPSL15 is a passive, 1x2 GPS signal splitter ideal for splitting a GPS antenna signal between two receivers while providing a DC current path to power a remotely located active GPS antenna from one receiver while blocking the DC path from the other. Max voltage rating at the DC blocked port is 10 VDC; maximum current rating is 50 mA. Furnished with SMA female connectors all ports. Being a "micro-sized" splitter, GPSL15 weighs only 21 grams and is suitable for applications requiring low-weight parts. See GPS micro splitter test data for more details.

Reverse Polarity SMA Splitter Combiner

Request 3D STEP files for INSTOCK power dividers / combiners.

RP2120 is a reverse-polarity SMA jack, RoHS compliant, 2 way, wideband, 50 ohm, RF power splitter, power combiner ideally suited for 2.4 GHz Wi-Fi and wireless LAN & WAN communications applications using the IEEE 802.11 protocol. All wireless band frequencies in the range from 698 to 2700 MHz are covered with optimal RF performance. Max microwave input power levels up to 40 watts can be handled in both power splitter and combiner applications. See reverse-polarity SMA splitter test data for more details.

"Vertical Launch" Power Divider Combiner

2 Way Vertical Launch Power Divider Combiner, 698-2700 MHz, SMA

PVL210 is a RoHS compliant, 2 way, wideband, 50 ohm, RF power divider, power combiner furnished with SMA female coaxial connectors. A unique feature of the unit is the "vertical launch" package which offers convenient coaxial cable access to all ports. All wireless band frequencies in the range from 698 to 2700 MHz are covered with optimal RF performance. Max microwave input power levels up to 40 watts can be handled in both power splitter and power combiner applications. See vertical launch SMA splitter test data for more details.

2.4-6.0 GHz IP67 Outdoor Splitter Combiner

Request 3D STEP files for INSTOCK power dividers / combiners.

PD2458 is an IP67 weatherproof, RoHS compliant, 2 way, wideband, 50 ohm, power divider, power combiner furnished with N-type female coaxial connectors. All wireless band applications in the frequency range from 2400 to 6000 MHz are covered with optimal performance. Max microwave input power levels up to 30 watts can be handled in both power splitter and power combiner applications. See 2.4-6.0 GHz N-type divider test data for more details.

2.4-6.0 GHz IP67 Outdoor SMA Splitter Combiner

2 Way Power Divider / Combiner, 2400-6000 MHz, SMA

PD2558 is an IP67 weatherproof, RoHS compliant, 2 way, wideband, 50 ohm, power divider, power combiner furnished with SMA female coaxial connectors. All wireless band applications in the frequency range from 2400 to 6000 MHz are covered with optimal performance. Max microwave input power levels up to 30 watts can be handled in both power splitter and power combiner applications. See 2.4-6.0 GHz SMA splitter test data for more details.

350-1000 MHz UHF/RFID Power Divider Combiner

Request 3D STEP files for INSTOCK power dividers / combiners.

PD2320 is a RoHS compliant, 2 way, wideband, 50 ohm, RF power divider, power combiner furnished with N Type female coaxial connectors. All wireless band frequencies in the range from 350 to 1000 MHz are covered with optimal RF performance. Max microwave input power levels up to 30 watts can be handled in both power splitter and power combiner applications. See N-type UHF power divider test data for more details.

350-1000 MHz UHF/RFID SMA Splitter Combiner

2 Way Power Divider / Combiner, 350-1000 MHz, SMA

PD2420 is a RoHS compliant, 2 way, wideband, 50 ohm, RF power divider, power combiner furnished with SMA female coaxial connectors. All wireless band frequencies in the range from 350 to 1000 MHz are covered with optimal RF performance. Max microwave input power levels up to 30 watts can be handled in both power splitter and power combiner applications. See 350-1000 MHz SMA splitter test data for more details.

BNC Female RF Power Divider Combiner

Request 3D STEP files for INSTOCK power dividers / combiners.

PD2520 is a RoHS compliant, 2 way, wideband, 50 ohm, RF power divider, power combiner furnished with BNC female coaxial connectors. All wireless band frequencies in the range from 698 to 2700 MHz are covered with optimal RF performance. Max microwave input power levels up to 30 watts can be handled in both power splitter and power combiner applications. See BNC power divider test data for more details.

TNC Female RF Power Divider Combiner

2 Way Power Divider / Combiner, 698-2700 MHz, TNC

PD2920 is a RoHS compliant, 2 way, wideband, 50 ohm, RF power divider, power combiner furnished with TNC female coaxial connectors. All wireless band frequencies in the range from 698 to 2700 MHz are covered with optimal RF performance. Max microwave input power levels up to 30 watts can be handled in both power splitter and power combiner applications. See TNC power divider test data for more details.

New 50 Ohm, Coaxial, Wilkinson Power Divider Combiners - Specification Table

Model No N Way Coaxial
Connectors
Frequency Range
(MHz)
Insertion Loss
(above split)
Amplitude Balance
(max)
Phase Balance
(max)
Isolation
(min)
Input VSWR
(max)
PD592A 2 Way TNC 698-2700 0.4 dB (above 3.01) 0.2 dB 22 dB  1.20:1  1.15:1 
PD592B 2 Way TNC 698-2700 0.4 dB (above 3.01) 0.2 dB 22 dB  1.20:1  1.15:1 
PD552A 2 Way BNC 698-2700 0.4 dB (above 3.01) 0.2 dB 22 dB  1.20:1  1.15:1 
PD552B 2 Way BNC 698-2700 0.4 dB (above 3.01) 0.2 dB 22 dB  1.20:1  1.15:1 
PD512A 2 Way SMA 698-2700 0.4 dB (above 3.01) 0.2 dB 22 dB  1.20:1  1.15:1 
PD512B 2 Way SMA 698-2700 0.4 dB (above 3.01) 0.2 dB 22 dB  1.20:1  1.15:1 
PD502A 2 Way N Type 698-2700 0.4 dB (above 3.01) 0.2 dB 22 dB  1.25:1  1.15:1 
PD502B 2 Way N Type 698-2700 0.4 dB (above 3.01) 0.2 dB 22 dB  1.25:1  1.15:1 
GPS230 2 Way SMA+N 1000-2000 0.4 dB 0.2 dB 22 dB  1.20:1  1.20:1 
CSS210 2 Way SMA 698-2700 0.5 dB 0.2 dB 22 dB  1.25:1  1.20:1 
PD5520 2 Way BNC 698-2700 0.4 dB 0.2 dB 22 dB  1.20:1  1.20:1 
PD4720 2 Way SMA 800-6000 1.0 dB 0.4 dB 20 dB  1.40:1  1.30:1 
PD4620 2 Way Type N 800-6000 1.0 dB 0.4 dB 20 dB  1.40:1  1.30:1 
PD2202 2 Way SMA+N 698-2700 0.4 dB 0.2 dB 22 dB  1.25:1  1.15:1 
PD2802 2 Way N+N-Plug 698-2700 0.4 dB 0.2 dB 22 dB  1.20:1  1.15:1 
PD2720 2 Way QMA 698-2700 0.5 dB 0.2 dB 22 dB  1.30:1  1.15:1 
GPS221 2 Way TNC 1000-2000 0.4 dB 0.2 dB 22 dB  1.25:1  1.20:1 
GPSL15 2 Way SMA 1176.45-1602 0.3 dB 0.1 dB 18 dB  1.30:1  1.10:1 
RP2120 2 Way RP-SMA 698-2700 0.4 dB 0.2 dB 22 dB  1.25:1  1.15:1 
PVL210 2 Way SMA 698-2700 0.4 dB 0.2 dB 22 dB  1.25:1  1.20:1 
PD2458 2 Way Type N 2400-6000 0.6 dB 0.3 dB 20 dB  1.35:1  1.30:1 
PD2558 2 Way SMA 2400-6000 0.6 dB 0.3 dB 20 dB  1.30:1  1.25:1 
PD2320 2 Way Type N 350-1000 0.6 dB 0.2 dB 22 dB  1.25:1  1.15:1 
PD2420 2 Way SMA 350-1000 0.6 dB 0.2 dB 22 dB  1.25:1  1.15:1 
PD2520 2 Way BNC 698-2700 0.4 dB 0.2 dB 22 dB  1.25:1  1.15:1 
PD2920 2 Way TNC 698-2700 0.4 dB 0.2 dB 22 dB  1.25:1  1.15:1 

New 50 Ohm, Coaxial, Wilkinson Power Divider Combiners - Specification Table

Model No. Coaxial Connectors Frequency Range (MHz) Insertion Loss VSWR DC Voltage DC Current RF-DC Isolation RF Input Power
BT4020 Type N 10-4000 0.35 dB 1.20:1  100V 1.5A 40 dB 100W
Back to Top