GPS812 is an eight way, passive, GPS signal splitter ideal for splitting a GPS signal eight ways from a separately powered signal source. Furnished with SMA type female connectors all ports. A special feature of this unit is the 200 ohm internal load which provides a current drain for the GPS receivers. Some GPS receivers incorrectly sense an antenna fault when there is no current draw. The 200 ohm internal load provides a simulated antenna current drain which prevents receiver faulting. Max voltage rating at the DC blocked ports is 15 VDC; maximum current rating is 75 mA.
The heart of the unit is a precision designed and etched Wilkinson type microstrip circuit on a low loss, high frequency, dielectric substrate. Electrical performance is highlighted by 1.0 dB max insertion loss (above the 9.03 dB power split), 22 dB min isolation, 1.45:1 max input VSWR and 1.20:1 max output port VSWR. Equal power split and symmetry is displayed by 0.5 dB amplitude balance and 5 degrees phase balance. Narrow band GPS performance in your band of interest may be even better. See 8 way GPS splitter test sweeps for details. DC block and 200 ohm internal load are specially designed to be RF transparent with negligable effect on performance.
Mechanical features include precision CNC, brass, 50 ohm SMA female coaxial connectors with tri alloy plating to ensure tarnish resistance
Housing dimensions are 7.98" wide by 2.98" deep by 0.88" high (202.7 x 75.7 x 22.2 mm). The SMA female (jack) connectors extend 0.44" (11.1 mm) from the housing. Operating temperature range is from -65°C to +85°C. Weight is 740 grams. See 8 way GPS signal splitter outline drawing for more information.
Model GPS812 is a 8-way, passive, SMA, GNSS splitter covering all frequencies from 1000 to 2000 MHz with best-in-class performance for GPS L1, L2, L3, L4, L5, GLONASS and Galileo global navigation satellite positioning system applications, and is deployed worldwide.
PD5180: DC pass 1 port, DC block 7 ports. Typically used for powering an active antenna through the DC pass port of the RF power divider splitter.
PD5182: DC block 8 ports. Typically used in combining applications to prevent passing DC to sum port or adjacent ports.
Standard RoHS Model: A standard RoHS compliant version of this eight way power combiner divider is available passing DC current through all ports. PD2180